Tool materials should have basic properties

The machining allowance refers to the thickness of the metal layer cut from the surface of the workpiece during machining. The machining allowance is divided into the total machining allowance and the process allowance. In the process of converting a blank into a part, the entire thickness of the me

Cemented carbide is an alloy material made of hard compounds of refractory metals and bonding metals through powder metallurgy.Cemented carbide has a series of excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance and corrosion resistance, especial

The milling cutter is a multi-edged rotary tool, and the teeth are distributed on the cylindrical rotating surface or end surface. Most milling cutters have been standardized. Each tooth of the milling cutter can be regarded as a simple turning tool or planer. In order to meet the requirements of va

There are so many options out there for router bits that it may be difficult to decide which one is the right router bit for your application. One of the most common questions I frequently get asked is whether to use an up cut or a down cut router bit.The difference between an up cut router bit and