产品 Inserts Shape |
型号 Type | 尺寸 Dimensions（mm） | 可选牌号 Grade for Choice | |||||||
ØI.C |
厚度 T |
内孔Φd |
刀尖圆角 Re |
RV3150 |
RV3260 |
RV3220 |
RV5280 |
RV5230 | ||
| DNMG150404 | 12.7 | 4.76 | 5.16 | 0.4 | a | a | A | a | |
DNMG150408 | 12.7 | 4.76 | 5.16 | 0.8 | a | a | a | A | A | |
DNMG150412 | 12.7 | 4.76 | 5.16 | 1.2 | a | a | a | A | A | |
| DNMG150404-ZT | 12.7 | 4.76 | 5.16 | 0.4 | a | a | a | A | |
DNMG150408-ZT | 12.7 | 4.76 | 5.16 | 0.8 | a | a | a | A | ||
DNMG150412-ZT | 12.7 | 4.76 | 5.16 | 1.2 | a | a | a | A | ||
| DNMA150404 | 12.7 | 4.76 | 5.16 | 0.4 | a | a | A | a | |
DNMA150408 | 12.7 | 4.76 | 5.16 | 0.8 | a | a | a | A | A | |
DNMA150412 | 12.7 | 4.76 | 5.16 | 1.2 | a | a | a | A | A | |
A：Recommeded grade(Always stock available) a：Maker-to-order
| RV1100 | P10~P20 | The special high-hardness substrate of gradient structure, combined with the thick TiCN and thick AL2O3 coating, greatly improves the wear resistance of the inserts. Applicable to steel finishing processing, Stable working conditions, and the pursuit of high wear-resistant occasions. |
| RV1200 | P15~P30 | The substrate of good toughness and strength combined with the thick TiCN and thick Al2O3 coating makes the coating greatly improved in wear-resistance and looks good in appearance. It is suitable for various processing of steel. |
| RV1300 | P15~P30 | The high- toughness substrate is matched with TiCN and Al2O3 coatings of suitable thickness so that the material can still achieve both wear resistance and stability under strong impact conditions, which is suitable for rough processing of steel. |
| RV8100 | P15-P25 M15-M25 | Ultra-fine particle base substrate, high wear resistance, fine edge treatment, suitable for finishing processing and finishing boring of stainless steel. |
| RV8200 | K15-K25 P15~P25 M15~M25 | The high-toughness substrate is matched with a suitable thickness of AlTiN coating to achieve both wear resistance and toughness. lt is suitable for many fields from general machining of stainless steel turning to mill. |
| RV8280 | P15-P30 M15-M30 K15-K30 | The preferred grade for stainless turning, for semi-finishing and roughing under continuous, interrupted cutting conditions. |
| RV8300 | M15-M30 | It is suitable for large depth of cut and large feed of turning of stainless steel under severe working conditions. |
| RV3150 | K15~K25 | Thick Al2O3 + thick TiCN coating combined with the hard substrate,with advanced coating technology to ensure smooth coating surface, low friction coefficient,suitable for cast iron finishing processing |
| RV3260 | K15~K25 | TiN + medium thickness Al2O3 + thick TiCN coating combined with the hard substrate,good resistance to spalling,suitable for continuous and interrupted turning of cast iron with toughness requirements. |
| RV2100 | K10~K20 | It is suitable for the finishing of aluminum alloy and cast iron. |
| RV2200 | K15-K25 P15-P25 M15-M25 | It is suitable for various processing of aluminum alloy turning to mill. |
| RV6250 | H10~H30 | KT6250 is a PVD nano-coated ultra-fine grained carbide grade for turning hardened steel. |
| RV6200 | S15~S30 | The substrate with excellent deformation resistance plus nano-coating,suitable for semi-finishing of hard-to-machine materials such as high-temperature alloys. |
| RV5280 | P10~P25 K10~K25 M10~M25 | The grade for cermet turning, The combination of fine dispersed hard phase particles,binder phase strengthening, and annular phase structure control makes it get good toughness,excellent red hardness , and crater wear resistance and is suitable for the finishing and semi-finishing of steel,cast iron , etc. |
| RV1330 | P20~P40 | Special Grade for Deburr Turning Inserts |
| RV3220 | K20-K30 P10~P30 | A tough substrate with TiN+Al2O3+TiCN coating for general processing of various materials. |
Need more information, please send us an inquiry.
Contact us for more information.