☆Products Description
Micro grain raw material
Grain size: 0.4-0.6μm
Co 10%, 12%
TRS >3600 N/mm2
Hardness HRA 91.8-92.5
Work piece HRC45-50 HRC55-60 HRC65 HRC68
Helix angle 30°-45 °
Diameter of cutting edge 0.2-0.9 mm; 1-20 mm
Diameter of rods 4-20 mm
Length 50-100 mm
Cutting Form Flat, Square, Ball nose, Corner Radius, Taper Flute, etc
Flutes No. 1-7
Application of high performance end mill tungsten solid carbide milling cutter specification:
1. Hardness: HRC45/50/55/60/65
2. Flutes: 2 flutes or 4 flutes
3. Helix Angle: 35 degree
4. Centered Cutting: Yes
5. Type: Square End Mill / Flat end mill / Metal cutting tool
6. Workpiece material: Steel, mould steel, low alloy, hardened steel, staninless steel, alloy steel
7. Coating: TiAlN
8. Tool body material: Tungsten solid carbide
9. Color: Black, yellow
Super raw material
Super coating
○The Raw Material Of Standard End Mills
○Super Coating Of Standard End Mills
☆Products Description
Micro grain raw material
Grain size: 0.4-0.6μm
Co 10%, 12%
TRS >3600 N/mm2
Hardness HRA 91.8-92.5
Work piece HRC45-50 HRC55-60 HRC65 HRC68
Helix angle 30°-45 °
Diameter of cutting edge 0.2-0.9 mm; 1-20 mm
Diameter of rods 4-20 mm
Length 50-100 mm
Cutting Form Flat, Square, Ball nose, Corner Radius, Taper Flute, etc
Flutes No. 1-7
Application of high performance end mill tungsten solid carbide milling cutter specification:
1. Hardness: HRC45/50/55/60/65
2. Flutes: 2 flutes or 4 flutes
3. Helix Angle: 35 degree
4. Centered Cutting: Yes
5. Type: Square End Mill / Flat end mill / Metal cutting tool
6. Workpiece material: Steel, mould steel, low alloy, hardened steel, staninless steel, alloy steel
7. Coating: TiAlN
8. Tool body material: Tungsten solid carbide
9. Color: Black, yellow
Super raw material
Super coating
○The Raw Material Of Standard End Mills
○Super Coating Of Standard End Mills
