☆Products Description Micro grain raw material Grain size: 0.4-0.6μm Co 10%, 12% TRS >3600 N/mm2 Hardness HRA 91.8-92.5 Work piece HRC45-50 HRC55-60 HRC65 HRC68 Helix angle 30°-45 ° Diameter of cutting edge 0.2-0.9 mm; 1-20 mm Diameter of rods 4-20 mm Length 50-100 mm Cutting Form Flat, Square, Ball nose, Corner Radius, Taper Flute, etc Flutes No. 1-7
Introduction of the carbide materials of the End mill
The materials to be cut
Corresponding Coating
Introduction of carbide materials of the End mill
Main Technical Parameters: ☆Application Used for cutting Carbon steel, Tool steel, Mould steel, Stainless steel, Titanium alloy, Copper, Cast Iron and Aluminium, etc.
☆Products Description Micro grain raw material Grain size: 0.4-0.6μm Co 10%, 12% TRS >3600 N/mm2 Hardness HRA 91.8-92.5 Work piece HRC45-50 HRC55-60 HRC65 HRC68 Helix angle 30°-45 ° Diameter of cutting edge 0.2-0.9 mm; 1-20 mm Diameter of rods 4-20 mm Length 50-100 mm Cutting Form Flat, Square, Ball nose, Corner Radius, Taper Flute, etc Flutes No. 1-7
Introduction of the carbide materials of the End mill
The materials to be cut
Corresponding Coating
Introduction of carbide materials of the End mill
Main Technical Parameters: ☆Application Used for cutting Carbon steel, Tool steel, Mould steel, Stainless steel, Titanium alloy, Copper, Cast Iron and Aluminium, etc.